The Printer Is Jammed - Causes and Ways to Fix the Error

This practical guide walks through the printer is jammed - causes and ways to fix the error, explains the main requirements, and highlights common issues that may appear along the way.

1. Cause the printer is jammed

- Print paper quality is not guaranteed

Paper makes an important contribution to the print quality of your products. On the market today, there are many types of paper with different thicknesses and materials. There are some types of paper that may not be suitable for the printer or ink you use.

Therefore, you should consider and choose the right type of paper for your printer, too thick or too thin is also the cause of paper jams in the printer.

- Paper is damp

When using a printer, users often buy a stock of paper that can be used quickly. However, if the storage process is not good, or the temperature and humidity are not suitable when the weather changes or you accidentally wet the paper, these causes all cause the paper to be damp and jam in the printer. .

Please store the printed paper in a cool, dry place, avoid high temperatures, which will cause the paper to be damp and wrinkled.

- Worn paper pulley

The printer used for a long time with high frequency can lead to some parts working too much, leading to wear and tear. When the pulley is worn, it may cause the pulley to not pick up the correct paper for 1 sheet at a time, but maybe 2, 3 sheets or maybe more, causing paper to jam in the machine.

- Tear silk sack

During the printing process, you may use a stapler to staple the document when it is finished printing, and you may accidentally drop faulty staples into the printer or you may forget to remove the staple before inserting the document into the machine. Pins falling into the machine can cause the silk sack to be torn or damaged, causing the printer to jam continuously.

2. How to fix paper jam error

- To clear jammed paper in the HP 1102

Step 1: Turn off the HP 1102 printer and disconnect the power from the printer.

Step 2: Open the cover and remove the toner cartridge from the printer.

Step 3: Pull the paper gently out of the printer.

Step 4: Insert the ink cartridge and reconnect the printer to use.

- Canon 2900 printer has a paper jam in the fuser

Step 1: Turn off the power and open the printer cover.

Step 2: Remove the toner cartridge from the machine.

Step 3: Remove the paper from the Canon printer.

Case 1: Printed paper is jammed on the bottom or top of the output, use two hands to slowly pull the paper out gently, do not do it fast and hard, it will cause the paper to tear.

Case 2: Printed paper is jammed in the fuser, insert 2 fingers into the back of the paper and then slowly pull the paper out.

Case 3: If the printer can open the back cover, you should open the back cover to make it easier to get paper.

Case 4: Paper is jammed both front and back of the printer, you should open both covers and pull the paper out.

Step 4: Insert the ink cartridge and reconnect the printer to use.

3. The printer has a paper jam but there is no paper inside

In the process of using the printer, you may encounter a paper jam error, but you cannot see the paper inside the printer.

The common cause of this error is the sensor malfunction, damage or dirt; main source or main identification error; The printer cannot locate the jammed paper correctly.

When you encounter this error, you should check and clean the sensor again, remove and check the inside for jammed paper in an invisible place. If you still cannot fix the error, you should contact a technician for faster and safer support.

Thank you for your interest in this article of ours. Hope this article will bring you useful information.