Error codes for washing machines Sanyo, LG, Toshiba

Each type of washing machine depends on the model, each setting a different error code table. When a problem occurs, the device will generate a signal and an error code will appear on the screen. From there, users can more clearly identify the types of errors for each type of washing machine, easier to fix if encountering simple errors.

In this article, the network administrator will gather a list of error codes in three models: Toshiba, LG and Sanyo, so you have more experience when repairing the washing machine.

1. Sanyo washing machine error code table:

1. E1 : Water supply obstacles.
2. E2 : Water does not flow.
3. E2 : Water is not discharged due to rupture valve, exhaust valve or exhaust valve.
4. EA : Broken water level sensor or line from buoy to board.
5. EC : Broken water level sensor or line from buoy to board
6. E1 : Don't enter the country.
7. RA : Damn buoy.
8. U3 : Set the device unbalanced.
9. U4 : Door switch.
10. U4 : Incident from the switch to the board.
11. U5 : The lid of the phone opens when in child lock mode.
12. UA : Damn buoy.
13. UC : Door switch.
14. UE : No load, motor runs off wire.

Error codes for washing machines Sanyo, LG, Toshiba Picture 1

If you are planning to buy washing machines for your family, you can consult some types at META online supermarket with competitive prices in the market:

2. LG washing machine error codes:

1. DE : Open door error, purple wire connects to board, buoy, magnetic sensor.
2. FE : Water overflow error.
3. IE : Don't enter the water.
4. LE : Motor lock error (lock motor).
5. OE : Error discharging water.
6. UE : Bad hair balancing temple, board, buoy.
7. CE : Source error, motor.
8. PE : Buoy pressure sensor.
9. £ E : Thermistor error.
10. AE : (auto off) automatically switches off the role, the power switch, and the green wire to the board.
11. E3 : Washer and engine sensor, cuaro.
12. OF : (overflood) water overflow error.
13. dHE : (dry heat) Motor fan drying, hot head.

Error codes for washing machines Sanyo, LG, Toshiba Picture 2

3. Toshib washing machine error code:

1. E1 : Water discharge error.
2. E2 : Safety lock error (Door switch).
3. E3 : Laundry is unevenly distributed inside the washing bucket.
4. E3 : Laundry is misaligned, cage screws are loose, the balance ring is open, the clutch is loose, the door switch loses the spring (due to the screwing of the cheek), the switch wire is blocked, the safety lever is blocked. .
5. E4 : Damn buoy.
6. E5 : Water supply error.
7. E6 : Washer motor, too much, low water level, clutch shaft, clutch shaft.
8. Ec1 : Many laundry or little water.
9. Ec3 : Many laundry or little water.
10. Ec5 : Many laundry or little water.
11. Ec6 : Many laundry or little water.
12. F : Multi-wash or charring.
13. E7 : Washing motor jam, too much, low water level, clutch shaft, sanso clutch.
14. E7-1 : Memory overflow error, programming: press the water level, timer, discharge, open the power, and the pip pip remove the power and about 1 minute of the pin works well.
15. E7-4 : Word count error.
16. E8 : Washing motor jam, too much, low water level, clutch shaft, sanso clutch shaft.
17. E9 : Water leaks, the washing bucket is broken, the valve is stuck, entangled with the senso of the broken water, do not forget to check the wires.

Error codes for washing machines Sanyo, LG, Toshiba Picture 3

Above is the synthesis of washing machine errors in 3 different carriers. When the screen appears these types of error codes, you will be able to determine the error status that the machine is experiencing, thereby thanks to the help of a technical specialist.

Refer to the following articles:

1. How to clean the air conditioner properly?

1. How to choose the appropriate air conditioner capacity

1. Use of each wind regime on air conditioner

Hope this article is useful to you!