Toshiba washing machine error codes and detailed solutions

Your Toshiba washing machine displays the letters E1, E2, F, EA. while in use and the machine also stops working, making you confused, wondering what the cause is? TipsMake.com will help you decode those characters and provide the most detailed solution, please refer to it.

E1: Error due to water drain pipe

1. The drain hose is not attached to the washing machine
2. The exhaust pipe is bent or the pipe mouth is flooded
3. The exhaust pipe is clogged with foreign objects or residue
4. Exhaust pipe placed too high

How to fix

1. Open the washing machine lid and close it, then press the Start button to let the machine operate normally again. This action helps the Toshiba washing machine's control system to repair itself and eliminate operating errors of the washing machine.
2. Let the washing machine drain the water inside the washing drum. If the E1 error message still persists, we can start checking and fixing the external and internal details of the machine with the next steps.
3. Check the drain pipe for bends, blockages or obstructions. If so, it needs to be fixed immediately so the washing machine can return to normal operation
4. Check the drain hose to see if it is loose or slipped out of the washing machine. If it is loose, it needs to be reattached and fixed firmly to ensure it does not slip out again, causing the Toshiba washing machine to report error E1.
5. If at this point the Toshiba washing machine is still faulty, then the E1 error does not come from the pipe and may be due to the drain pump, clogged drain line inside the washing drum or due to a problem with the washing machine's control board. Then, to continue the troubleshooting process, turn off the power supply to the washing machine to ensure safety during the repair process.
6. Remove the pump located behind the washing machine to inspect and clean all parts

E2, E21, E23: Door switch error, magnetic switch is broken, door lid lock switch is broken, door not closed

How to fix

1. Just close the lid of the washing machine securely
2. Call a washing machine repairman at home to check if the door switch is at fault. If this error occurs, it may be necessary to replace new components

E3, E31, E32: Laundry is unevenly distributed in the washing drum, the washing machine is not balanced, the control board has a problem leading to an erroneous error message

How to fix

1. Check to see if the laundry inside is tangled or bunched up on one side. If necessary, redistribute the laundry evenly. In addition, the next time you put items inside the washing drum, you need to put them one by one to avoid putting the whole thing in at once, which can easily cause the washing drum to misalign.
2. Check around the washing machine's base to see if it is tilted or if the washing machine's placement is secure. The location of the washing machine plays an important role in keeping the machine from damage
3. Call a washing machine repair service to ensure this error can be fixed. Avoid arbitrarily checking and repairing incorrectly, which can cause more serious errors in the washing machine

E4: Float broken

How to fix

1. Check the status of the pressure float switch and whether the switch is open or closed. If the float is found to be damaged, it needs to be replaced or if the float switch is open, it needs to be closed
2. Float switch in normal condition, check pressure float. If the pressure float is damaged, replace it with a new one
3. If the above causes have been checked and fixed but the washing machine still reports error E4, the washing machine may have a damaged control circuit board or many other causes. In this case, you need to call a washing machine repair service

E5: Water supply error

1. The faucet can be locked or run out of water
2. The water supply pipe is clogged
3. Damaged filter mesh
4. Water level sensor is broken

How to fix

1. Reopen the water supply tap
2. Clean the water pipes leading to the washing machine
3. Remove the filter mesh to clean it
4. Call a washing machine repairman to fix the water level sensor and circuit board errors

E6, E7, E8: Washing motor stuck, too many items, low water level

How to fix

1. Buy a new genuine exhaust motor to replace the old one
2. Check the condition of the amount of clothes put in the washing machine and set the necessary water level

E64: Display error due to damaged Board components

How to fix

1. Contact the warranty or repair service unit

E9, E91, E92: Water leaks, washing drum is punctured, drain valve is stuck

How to fix

1. Water leaks are due to being placed in an uneven location, so you need to place the machine in a more level location
2. Replace the washing drum with a new one
3. Check the washing machine's water drain valve. You can remove it to clean the filter or replace it. If the water drain valve still works well and is not damaged, you should check the water level sensor

E94: Sensor error

How to fix

1. Check to see if the water level sensor is working properly. If it is damaged, replace it

E95: Error due to magnetic switch, washing machine main board error, float line error

How to fix

1. These are complex errors, you should contact a home washing machine repair service to fix these errors

EA (domestic machine): Voltage supply error

How to fix

1. Check the power source again

F (domestic machine): Overload of washing volume

How to fix

1. Remove items from the washing machine to reduce the amount of laundry needed

Toshiba washing machine error codes and detailed solutions Picture 1

How to use Toshiba washing machine durable

Some notes that users need to pay attention to when using Toshiba washing machines to avoid some errors and increase the durability of the machine.

1. Check the water supply, power source, exhaust pipe. to see if they meet the requirements before washing.
2. Make sure the place where the washing machine is installed is sturdy and balanced.
3. Pay attention to the amount of clothes when washing, not too many compared to the washing machine's standards, as well as set the water level corresponding to the amount of clothes.
4. Regularly clean the washing machine.
5. Regularly check the washing drum for stuck or punctured problems.

Samuel Daniel

Update 11 April 2024