How to use Panasonic air conditioner in the most detail

Below TipsMake.com will guide you how to use Panasonic air conditioner in detail for each mode, how to set the timer, how to turn it on and off, and tips on saving electricity.

How to use Panasonic air conditioner in the most detail Picture 1

How to turn on/off Panasonic air conditioner

Press the ON/OFF button on the Panasonic air conditioner remote once to turn on the air conditioner. When the machine is turned on, the POWER light will display green.

When the air conditioner is on, press the ON/OFF button again to turn off the air conditioner.

Modes on Panasonic air conditioners

After turning on the Panasonic air conditioner, to adjust the modes on the air conditioner, you need to press the MODE button on the remote and then select one of the following modes:

AUTO (automatic mode) : In AUTO mode, the air conditioner will automatically adjust the temperature and humidity parameters to a predetermined level (temperature is about 23 - 25 degrees Celsius).

COOL (cooling mode) : This is the cooling or refrigeration mode of the machine. You can increase or decrease the temperature according to your needs by pressing the TEMP button up ▲ (increase temperature) and down ▼ (decrease temperature).

DRY (dehumidifying mode) : When DRY mode is turned on, Panasonic air conditioner will perform the task of dehumidifying the room. People often use this mode on hot, humid days.

HEAT (heating mode) : HEAT heating mode is usually only available on Panasonic 2-way air conditioners. You can use HEAT mode to warm the room in winter.

FAN (fan mode)

E - ion/ Ionizer (air filtration, ion generation function) : This function is often found on Inverter air conditioners. When this feature is started, about 20 thousand negative ions will be created, helping to keep the air in your room fresher.

POWERFUL (quick cooling function) : Just like COOL, POWERFUL is a cooling function but at a faster speed.

QUIET (Noise reduction function) : Normally, the air conditioner will make noise during operation. You can use this feature for maximum reduction in the room. QUIET is often used at bedtime. To cancel this mode, just press select 3 times consecutively.

How to adjust the fan speed (FAN SPEED) of Panasonic air conditioner

To change the fan speed on Panasonic air conditioner, just press the FAN SPEED button 1 - 4 times:

1. 1st time: Low fan mode
2. Second time: Medium fan mode
3. 3rd time: High fan mode
4. 4th time: AUTO FAN automatic fan mode

Adjust the wind direction of Panasonic air conditioner

To adjust the air conditioner wind direction, press the AIR SWING button and select the appropriate mode.

How to set Panasonic air conditioner timer

The off and on timers both perform the same operations, but the only difference is the timing of execution. For example, set a timer to turn off when the air conditioner is running, and set a timer to turn it on when the air conditioner is not working.

To set a timer for Panasonic air conditioner, follow these steps:

Step 1: Select ON TIMER

Step 2: Select the time to turn on the air conditioner using the ▲ (increase) and ▼ (decrease) buttons.

Step 3: Select the ON TIMER button again. To cancel, select CANCEL .

How to save electricity when using Panasonic air conditioner

At this point, surely using Panasonic air conditioners is no longer difficult for you, right? So how to save electricity when using this device? It's simple, just follow these instructions:

Choose an air conditioner suitable for the room volume: You should keep this in mind when buying an air conditioner. If the air conditioner capacity is smaller than necessary for your room volume, the air conditioner will have to operate continuously to maintain the air conditioner. Maintaining the temperature will damage the air conditioner quickly, cool slowly, and waste electricity.

Always turn on the air conditioner at an average temperature above 23 degrees Celsius: In the summer, we often have the habit of turning on the air conditioner at the lowest level. However, according to experts, using air conditioners at temperatures that are too low will harm your health, causing the air conditioner to break down quickly and waste a lot of electricity.

The temperature difference between the room and outdoors should only be a maximum of 10 degrees Celsius : If the difference in temperature between the room and outdoors is too large (over 10 degrees Celsius), the air conditioner will have to work at extremely high capacity to balance the temperature. by heat. In this case, the air conditioner is easily damaged and consumes a lot of electricity.

You should close the door when turning on the air conditioner : A closed room will prevent air from inside the room from leaking out and vice versa. This helps the air conditioner not need to work as much to balance the temperature, thereby saving electricity. However, you should not close the door too tightly to avoid affecting your health.

Periodic cleaning : Dust is one of the reasons why the air conditioner is easily damaged, reduces performance and obviously consumes more electricity. Therefore, regularly clean the air conditioner, at least once every 6 months.

Turn on the air conditioner timer function when going to bed : The temperature at night is usually lower than during the day, so there is no need to turn on the air conditioner all night. Turn on the air conditioner timer function when going to bed to save electricity and protect your health.

How to use Panasonic air conditioner in the most detail Picture 2

Hopefully our sharing will help you know how to use Panasonic air conditioners easily and save electricity. Visit META.vn for advice and to order quality, cheap Panasonic air conditioners.

Marvin Fry

Update 06 March 2024