Among Us: How to Do a Task on Map POLUS

This guide provides a practical overview of Among Us: How to Do a Task on Map POLUS, including its main features, benefits, limitations, and important considerations.

As a Crewmate, though, running around to complete missions can also be fun, especially since you never know when an Imposter might come across and kill you.

So, as a Crewmate, it's important to learn about the different missions in each map to speed up your quests and win every match. Furthermore, as an Imposter, knowing about every quest can also be helpful as it will allow you to better fit in and protect your identity. In particular, in this article, you will know how to do map tasks POLUS Among Us the most complete!

Boiler room duties

There are two missions in this room:

Open Water Way

Turn the two valves counterclockwise to open them until the pointer fills up.

Replace the water bottle

Press the button until the water tank is filled, then go to the Office to replace the empty bottle with the one you are carrying.

Communication task

There is only one task in this room, Restart Wi-Fi. You have to go to the Communications room and rotate with the router in the back. Just flip the switch down, wait a minute and flip it over. You can go to other jobs while you wait and come back later to complete the Wi-Fi restart process.

Dropship missions

There are two quests here, one of which is a joint quest.

Chart Course

Simply drag the ship along the dotted line until you reach the end.

Key Plug (General)

Drag your key to the left into the highlighted position and then rotate it 90 ° clockwise to complete the task.

---

Electrical Task

There are two quests here, one of which is a joint quest.

Download / Upload Data

You just need to scroll to the designated room, interact with the highlighted table and click "download" to download the data. Then, run to Communications department to upload the data following the same procedure.

Wire Repair (General)

You have to go to the designated room and interact with the marked board to start fixing the ropes. To complete the task, you need to drag the strings on the left to their respective color on the right. You have to repeat this a total of three times in different rooms throughout Polus.

---

Laboratory Task

There are three missions in this room:

Repair Drill

Just click on the red boxes multiple times until they disappear completely.

Align the Telescope

You need to drag the focus of the telescope to the element shown in the image in the lower right.

Temperature Adjustment

Using the arrows on the panel, you need to adjust the numbers on the left to match the numbers on the right.

---

MedBay Tasks

There are two tasks here, one of which is tasks that people can observe while you are on a mission.

Scan (Intuitive)

To complete the process, you simply need to interact with the scanner and let it finish. Other players can watch you scanned and this will prove your innocence.

Inspect Sample

To get started, click on the green button and then wait for 90 seconds. Once you get back, you need to click on the template with a different color from the rest. Just like with the "Restart Wi-Fi" task, you can do something else while you wait.

---

Mission O2

There are four missions in this room:

Download / Upload Data (Download / Upload Data)

You just need to scroll to the designated room, interact with the highlighted table and click "download" to download the data. Then, run to Communications department to upload the data following the same procedure.

Empty Garbage

Using the right lever, hold it down until the trash tray is empty. You need to hold it down until you are completely clear, otherwise you will not complete the task.

Monitor Tree

Interact with the tree and drag the sliders to match the dotted lines.

Fill the canister

Pull the oxygen canister from the top down into the tray. The box will automatically connect and begin to fill. Repeat this process twice to complete the task.

---

Office Tasks

There are three quests here, one of which is very popular with the majority of players:

Swipe

Pull your keycard from the wallet at the bottom and over the card reader to scan the card. You need to swipe it just right; If you do it too quickly or too slowly, you will fail and have to try again until you get it right.

Download / Upload Data

You just need to move to the designated room, interact with the highlighted table and click "download" to download the data. Then, run to Communications department to upload the data following the same procedure.

Scanning Boarding Passes (Common)

Click the yellow arrow to grab your boarding pass and flip it, then drag the card over the reader to scan.

---

Outside mission

There are seven quests in this zone, although six of them are identical:

Fix Weather Node

There are six possible buttons for this mission, all of which take place outside the map. The task here is very simple: Drag the yellow dot from the beginning of the maze to the end without making any mistakes. If you go to a dead end, you'll need to start over. After completing the maze, you must go to the Lab and interact with the control panel to reactivate the button you just fixed.

Recording temperature

Using the arrows on the panel, you need to adjust the numbers on the left to match the numbers on the right.

---

Spicemen Room Task

There are four quests here:

Start the reactor

To start the reactor, you have to repeat the sequence of lights displayed on the left panel using the right keyboard.

Download / Upload Data

You just need to move to the designated room, interact with the highlighted table and click "download" to download the data. Then, run to Communications department to upload the data following the same procedure.

Unlock Manifolds

To complete this task, you just need to click on the numbers in ascending order.

Store Artifacts

This task is very simple; You just need to drag the samples on the left into the corresponding slots.

---

Storage Task

There is only one mission here, the Fuel Engine. You need to go to the Storage Room, fill a fuel box by holding the button until it is full, then go to the rightmost engine on the lander to refuel. Repeat the process for the leftmost engine and you're done.

---

Weapon Tasks

There are two tasks here, one of which we can see when someone else is on a mission:

Shoot asteroids (Intuitive)

After interacting with the screen, you need to click the asteroids as they fly across the screen to destroy them. You need to destroy a total of 20 asteroids to complete the mission. This quest is intuitive, meaning other players can watch you complete. The visual aspect is the laser turret outside the Weapons room, where a laser can be seen while the player is on a mission.

Download / Upload Data

You just need to move to the designated room, interact with the highlighted table and click "download" to download the data. Then, run to Communications department to upload the data following the same procedure.

---

Summary

These are all tasks of the map Polus Among Us . As you can see, this room is a bit smaller than Mira HQ and The Skeld, but the different rooms are mostly separate from each other and the player has to go through the dark courtyard to get from one point to another.

Furthermore, with the exception of a few rooms with windows, most areas on this map are isolated from aisles, which makes them ideal spots for ambushes. Luckily, with this guide, you're now ready to join Polus and bring your team to victory!

FAQ

What should I know about Among Us: How to Do a Task on Map POLUS?

Focus on the key features, requirements, limitations, and practical use cases explained in this guide.

How do I get the best results with Among Us: How to Do a Task on Map POLUS?

Follow the recommended steps, use current software or information, confirm compatibility, and review settings before major changes.

Are there any risks or limitations?

Potential limitations depend on compatibility, data quality, cost, privacy, support, and how the product or method is used.