Safety rules cannot be ignored when using a handheld cutter

Highly rated for safety as well as compact design that is easy to move and use, portable cutters are popular today.

However, to ensure absolute safety when using the above items, you should not ignore the basic safety rules below.

>> More reference: How to choose a lawn mower suitable for each type of grass

What types of portable cutters include?

Portable cutters are a term for machines that are capable of cutting some materials and are designed to be extremely handy.

Types of portable cutters on the market include:

1. Portable lawn mower.
2. Portable iron cutting machine.
3. Machines for cutting bricks, stones . hand-held .

In this article, we will help you come up with some safety rules to use these 3 machines effectively.

Safety rules when using hand-held lawn mowers

The portable lawn mower is usually compact in design with a power-to-mechanical transmission system for cutting blades. Users can adjust the joystick to adjust the direction of the blade to the desired grass.

When using, users need to follow the following principles:

1. When the machine is running, absolutely no more gasoline.
2. Do not add gasoline in a place near a fire source, be careful not to overflow the gas.
3. Always wear protective gear when operating the machine.
4. Do not use a lawn mower in a closed house.
5. Care should be taken to operate the lawn mower at least 1 meter away from potentially explosive areas because when the engine operates, it will produce very sharp heat.
6. Do not let the cutter blade touch the hard objects to cause chipping.
7. Absolutely not touch the cutting blade when the machine has not stopped completely.

Safety rules when using portable iron and aluminum cutting machines

When the iron cutting machine works, the sparks are fired around, so you need to follow the following points:

1. Always use protective clothing such as eyeglasses, gloves, ear muffs, specialized clothing.
2. When you want to move the device to another place, remember to turn off the device to ensure safety.
3. Absolutely do not use the device in an explosive atmosphere.
4. Do not leave the device in damp or high temperature places.

You should also refer to the steps to be able to use the iron cutter best.

Note: The above rules apply to all types of desktop cutters.

>> Refer to using iron cutting machine here

Safety rules when using machines to cut bricks, stones . hand-held

1. Before cutting, you should see if the blade is suitable for cutting the tiles you want. Each type of tile will be suitable for different cutting edges. This not only ensures safety for users, but also helps to prevent bricks from being cracked and wasted.
2. Use protective equipment such as gloves, eyeglasses or masks to minimize the possibility of splashes of bricks.
3. Regularly check and maintain the brick breaker periodically.
4. Try cutting a few lines with old or broken bricks to check the cuts.
5. Regular cleaning should be done regularly.

Instructions for using safe brick cutter

Step 1: Prepare the appropriate blade

You need to select the blade to best suit the type of tile you want to cut.

Eg:

1. 8mm special blades for cutting regular ceramic tiles.
2. 10mm blade used to cut ordinary ceramic tiles or stone glaze.
3. 18mm blade used to cut glass tiles 2 skin, stone tiles.

When you select the right blade, proceed to install the blade in the correct position by turning the handle, and then insert the blade and then tighten it as it was.

Step 2: Put the tiles in the cutting table, adjust the size of the tiles to be cut, and place the blades in contact with the tiles.

Step 3:

1. One hand holds the brick steady, the other holding the lever pushes the blade continuously in contact with the tile surface.
2. Hand hold push bricks from the beginning to the end of the tiles. At the end of the cutting point, place the A-bar at the end of the brick face and then gently press the handle down to make the tank brick in half.

These are safety rules that cannot be ignored when you use portable cutters. Always adhere to them so that you can ensure safety for yourself and those around you and produce quality products with high aesthetics.

Suggest some current best-selling handheld cutters

Silver Oshima 260 lawn mower

Selling price: 1,550,000 VND

1. Warranty 12 months
2. Brand: Japan
3. Made in China
4. Speed: 7,000 rpm
5. Capacity: 500W
6. Length needed: 1.6m

Total ceramic cutting table THT576004

Price: 750,000 VND

1. Warranty: 6 months
2. Made in China
3. Brand: Germany
4. Cutting blade: 16mm
5. Width: 195mm
6. Length: Cut (600mm); Product (815mm)

Total iron cutting machine TS92035516 355mm

Selling price: 1,790,000 VND

1. Warranty: 6 months
2. Made in China
3. Brand: Germany
4. No-load speed: 3,800 rpm
5. Capacity: 2,350W
6. Cutting blade diameter: 355mm

Contact us if you need to own these machines:

1. Hanoi: 024.3568.6969
2. City: 028.3833.3366