3 simple ways to remove moldy smell for towels, towels

Check out the following 3 simple ways to get rid of moldy smells on towels and wipes with detergents available in the home.

Used wet towels in your home often smell very uncomfortable, making us wake up every morning to not touch the face towel. Often, the main cause of these odors is mold growth after use and they are difficult to clean. Washing towels several times in the usual way can reduce unpleasant odors but not strong enough to completely remove moldy odors. Therefore, you can refer to the following 3 simple ways to remove moldy smell on face towels and wipes with detergents available in the house.

Method 1: Wash towels with vinegar and baking soda baking powder

1. Wash towels

3 simple ways to remove moldy smell for towels, towels Picture 13 simple ways to remove moldy smell for towels, towels Picture 1

Add towels with unpleasant moldy odors to the washing machine, start turning on the hottest water wash mode, add a white vinegar cap and a lid of baking soda.

  1. No need to add detergent or fabric softener.
  2. You can wash the towel with just vinegar or baking soda baking powder if you have one of these.

2. Soak the towel in the washing machine

3 simple ways to remove moldy smell for towels, towels Picture 23 simple ways to remove moldy smell for towels, towels Picture 2

Press the stop button when the towel is turned and rinsed. Then, soak the towel with the vinegar and baking soda solution for an hour. After one hour, continue the washing mode until the end.

3. Add vinegar and washing powder

3 simple ways to remove moldy smell for towels, towels Picture 33 simple ways to remove moldy smell for towels, towels Picture 3

Next, you need to wash again. This time, you will add a cap of vinegar and a kind of laundry detergent to be used daily. Put in the washing machine a regular amount of detergent and wash it until the end of the process, select the multi-cycle spin mode.

  1. You can choose " extra spin cycle " mode if your washing machine has this feature or turn on the machine once more after the first spin ends.

4. Transfer the towel to dry immediately after washing

3 simple ways to remove moldy smell for towels, towels Picture 43 simple ways to remove moldy smell for towels, towels Picture 4

At the end of the second wash, remove the towel and put it in the dryer. Set the highest heat setting and let the machine operate until the towel is completely dry. After that, continue drying for the second time.

Method 2: Soak towels in hot water and washing powder

1. Use 2/3 of the Oxiclean solution cap

3 simple ways to remove moldy smell for towels, towels Picture 53 simple ways to remove moldy smell for towels, towels Picture 5

Oxiclean is a popular detergent used to remove stains on clothing. When used, it will produce Hydrogen Peroxide or Oxygen because OxiClean is the main ingredient of Baking Soda and Hydrogen Peroxide. Mix 1 cap of OxiClean in clean water at the ratio of 1: 1. If washing with vinegar and baking soda does not work, you can try soaking towels in hot water with Oxiclean. To begin, pour 2/3 of the Oxiclean solution into a large wash basin.

  1. Gloves should be worn to protect your hands from detergent solution.

2. Add hot water to the washing basin

3 simple ways to remove moldy smell for towels, towels Picture 63 simple ways to remove moldy smell for towels, towels Picture 6

Add hot water to the washing basin. If the tap water is not hot enough, you can boil water and pour it into the washing basin. Gently shake the wash basin back and forth to dissolve Oxiclean into the water when pouring hot water into the basin. Be careful not to let water stand out from the basin.

3. Put the towel in the basin

3 simple ways to remove moldy smell for towels, towels Picture 73 simple ways to remove moldy smell for towels, towels Picture 7

After filling half a pot of hot water, put a towel in the basin. Make sure you soak the whole towel in water. After that, soak the towel in the pot for 48 hours.

4. Wash towels in the washing machine

3 simple ways to remove moldy smell for towels, towels Picture 83 simple ways to remove moldy smell for towels, towels Picture 8

After completing the soaking of the towel, remove the towel from the basin and dry it. Put the towel in the washing machine and turn on the hottest water mode, add detergent and fabric softener.Also, you can add Oxiclean to the washing machine.

5. Dry the towel

3 simple ways to remove moldy smell for towels, towels Picture 93 simple ways to remove moldy smell for towels, towels Picture 9

Transfer towels to the dryer immediately after washing. Choose a high temperature to dry until the towel is completely dry. Your towel will smell like new after applying this method.

  1. If the odor does not disappear, you may need to change to a new towel.

Method 3: Remove mold in the washing machine

1. Check the washing machine to make sure there is no damage

3 simple ways to remove moldy smell for towels, towels Picture 103 simple ways to remove moldy smell for towels, towels Picture 10

If the water is not drained from the washing machine after each washing, the smell of mold may arise from it. Water can also accumulate somewhere in the washing machine without your knowledge. In that case, you need to contact a professional to repair or consider buying a new washing machine.

2. Clean the rubber washer in the washing machine

3 simple ways to remove moldy smell for towels, towels Picture 113 simple ways to remove moldy smell for towels, towels Picture 11

Sometimes, this is the cause of moldy smell for your towels.Rubber washers work to prevent water from leaking out when the washing machine is operating.However, cleaning this part is an important tip to remove moldy odors in the washing machine.You can clean it with soap, rags, mildew cleaner or use a detergent containing 50% water and 50% bleach.

  1. An old brush can be used to clean every corner of the rubber gasket.
  2. Make sure you clean all the nooks and crannies on the rubber washer of the washing machine.You may have to overturn the rubber ring to clean the smallest rubber folds.

3. Clean the laundry detergent compartment

3 simple ways to remove moldy smell for towels, towels Picture 123 simple ways to remove moldy smell for towels, towels Picture 12

Remove the soap compartment from the washing machine and wipe it with a detergent with a bit of dishwashing liquid and water. The amount of soap left and deposited in the soap compartment can also make your washing machine smell bad.

  1. If it is not possible to remove the soap compartment from the washing machine, try to clean the inside of the compartment with a small cloth or rod.

4. Turn on self-cleaning mode

3 simple ways to remove moldy smell for towels, towels Picture 133 simple ways to remove moldy smell for towels, towels Picture 13

Turn on the longest washing mode, no clothes inside and with the hottest water possible.If the mildew smell remains after washing, run it again.The smell of mold can be ruled out after a few runs.You can add one of the following to washing water:

  1. 1 cap of detergent
  2. 1 cap of baking soda baking powder
  3. 1/2 cap of dishwash enzyme powder
  4. 1/2 cap of industrial detergent
  5. 1 cap of vinegar

5. Looking for professional support

3 simple ways to remove moldy smell for towels, towels Picture 143 simple ways to remove moldy smell for towels, towels Picture 14

If the above methods cannot eliminate moldy odor, you may have to call a professional maintenance worker to check the washing machine. It is possible that mold appears behind the washing machine cage or for example by blocking pipes or sieves.

  1. An experienced repairer can judge the problem that the washing machine faces and more, it may be necessary to remove the washing machine to find the cause if necessary.

6. Use measures to prevent moldy odors

3 simple ways to remove moldy smell for towels, towels Picture 153 simple ways to remove moldy smell for towels, towels Picture 15

Once you find the cause of the offensive odor, take preventive measures to ensure that mold will no longer increase. You can refer to the following ways:

  1. Dry the washing machine .Open the washer door when not in use.However, care should also be taken to avoid pets or children trapped in the machine.
  2. Use detergent properly .Use detergent to create less soap, which will help your washing machine work more efficiently.Detergents often produce less foam than washing liquids.Besides, do not give too much detergent compared to the normal level.Sometimes with a little detergent, washing powder also helps clothes cleaner.
  3. Avoid using fabric softeners.Fabric softeners are usually in liquid form and are often stagnant in the compartment, facilitating mold growth.Instead of using liquid fabric softeners, use laundry balls to make clothes softer.
  4. Drying rubber gaskets.Use a rag to wipe the entire area and the grooves inside the rubber gasket.It is best to wipe the rubber gasket after each washing.If there is no cleaning of rubber washers after each washing, you should clean them weekly to remove mold.
  5. Periodic cleaning .Set hot water and wash your washing machine periodically once a month.This is an opportunity to disinfect washing machines, as well as washing heavy and heavy items such as work clothes or dirty towels.

Refer to some more articles:

  1. 21 great tips for cooks
  2. 9 essential tips can save you in emergencies
  3. The first aid steps in time when the hand jammed into the door gap

Having fun!

4 ★ | 2 Vote