UltraViewer has just updated with a new feature that allows users to remotely power on their computers. This enables users to control the power on and off of their devices, whether they are working online or providing remote technical support.
For convenient remote control of your device, in addition to disabling sleep mode on your computer using UltraViewer , you can also set a time to automatically turn on your computer remotely using UltraViewer so you can use the device whenever you want.
Instructions on how to remotely power on a computer using UltraViewer
How to remotely start a computer using UltraViewer
2.1 On the partner computer, the machine is being controlled.
Step 1: Download and install UltraViewer using the link below.
- Download the latest version of UltraViewer for PC.
Step 2: Open UltraViewer , check the boxes for "Run UltraViewer with Windows" and "Allow turn on computer remotely ".
- Running UltraViewer with Windows: UltraViewer will run every time the computer is turned on. If you disable UltraViewer from starting with Windows , you will no longer be able to control the computer remotely.
Step 3: Set the time in the Wake Up Configure table => click OK.
- The computer startup time will be set daily with specific time intervals.
=> For example: Taimienphi sets the computer to start up every 10 minutes between 7 AM and 6 PM on weekdays (Monday to Friday).
2.2 On the control panel
Step 1: Enter the ID and password of the partner computer , the device you want to control, or remotely power on.
Step 2: Select the triangle icon => Press Remote Power On to start the device.
After remotely turning on the computer using UltraViewer, the device you control will start up at the time you previously set to connect and use it. If you encounter UltraViewer connection errors, please apply the following troubleshooting steps for common UltraViewer remote computer connection problems .
Additionally, if you don't know how to remotely control a computer using Ultraviewer, you can refer to the instructions shared in the article below to learn how.