How to use heating mode on proper air conditioning, efficient and energy saving

For winter air conditioning, we need to use the heating function but in reality the air warming process consumes more power than cooling. So how to use the heating mode of air conditioner for efficiency and savings? Let's find out with the Network Administrator through the article below.

How to use heating mode on proper air conditioning, efficient and energy saving Picture 1

First, learn the principle of operating 2-way air-conditioning heating

Similar to the cooling principle, the heating mode operates indirectly through a heat exchanger, ie the air will not be directly heated by the compressor and then applied to the user, converting the energy through the medium (gas Air) to warm the air and spread evenly throughout the room, heating on a large scale.

For air conditioning, compressor operation is the highest power consumption, besides some air conditioners also have electric auxiliary heating parts to enhance the efficiency of air heating.

Therefore, the actual performance in heating mode consumes more power than cooling.

How to use air conditioners for heating to save electricity?

To use the heating mode of the air conditioner properly and economically, users should pay attention to some points as follows:

1. The capacity of the conditioner must match the room size

The 9000 BTU (1HP) air conditioner has the best performance both cooling and heating for rooms with an area of ​​8 to 15 square meters. Air conditioning 12,000 BTU (1.5 HP) good heating in the area from 16 to 22 square meters. However, the installation location also partly affects the working efficiency of the device so your family should choose the suitable air conditioning installation location.

How to use heating mode on proper air conditioning, efficient and energy saving Picture 2

2. Options set at a reasonable temperature

In winter, reducing the setting temperature by 2 degrees will help users save more than 10% of electricity. Therefore, it is recommended to choose the heat level that is not too different from the outside temperature, while ensuring power saving and avoiding heat shock when traveling between the two environments. In addition, because hot air is lighter than cold air, they are often pushed up, so the position and direction of wind when used also has a significant impact.

3. For reasonable wind speed and frequent changes

Specifically, when the air conditioner is turned on, it is necessary to adjust the high wind speed to speed up the heat exchange process in the room. When the device is working stably, the heat level in the room is balanced with the set temperature so the speed is low.

4. Notice the humidity of the room

Using heating mode will make the room air dry. Therefore, attention should be paid to operating regimes and support measures to ensure health. Your family should buy more humidifiers to ensure skin and respiratory system when using air-conditioning.

How to use heating mode on proper air conditioning, efficient and energy saving Picture 3

5. Close the room space

However, this will make the air more difficult to circulate, so that it will be harmful for health because it creates conditions for harmful bacteria to multiply. Therefore, having adequate ventilation time after a few hours of using air conditioner will help your family become a smart consumer.

Hopefully with the information on the family you will use the heating in air conditioner effectively and save electricity.

And don't forget to visit META.vn to order air conditioner! Thank you for following the article!